Jj Hydraulics Private Limited
Jj Hydraulics Private Limited
ISO 9001:2008 Certified
Goregaon East, Mumbai, Maharashtra
SEND SMS
SEND EMAIL

Single Ferrule

J. J.” high pressure Single Ferrule fittings are manufactured to DIN 2353 Fittings specification and ISO 8434 – 1 for ease of Interchangeability. These DIN 2353 Fittings are available for different pressure rating from 100Bar to 630Bar. These fittings are also know as Flareless Bite Type Fittings, 24Deg COne Fittings

  • Type
  • Flare less Bite Type (Single Ferrule Fittings) Weld Nipple Type (Weldable Fittings_
  • Series
  • L (Light series fittings), S (Heavy series fittings)
  • Size
  • 4mm to 42mm, 1/8”OD to 2”OD, 1/8”NB to 2”NB
  • Material
  • Steel, Stainless Steel, Brass (From extruded bar or forging)
  • Pressure
  • Ranging from 100Bar to 630Bar depending on type and size

Ferrule

Ferrule
  • Ferrule
Ask For Price
Ferrule -- DIN 2353 Fitting / Single Ferrule Fitting / Bite Type Fitting / 24Deg cone fittingFerrule is the main component in Tube Fitting assembly.Our Ferrule are Hardened so that it would bite / swage properly on the tube
Request
Callback
Yes! I am Interested

Nut

Nut
  • Nut
Ask For Price
Nut -- DIN 2353 Fitting / Single Ferrule Fitting / Bite Type Fitting / 24Deg cone fitting During assembly the nut is progressively tightened causing harderned ferrule to slide along the 24Deg Cone seat of the body and grip the tube
Request
Callback
Yes! I am Interested

Straight Union

Straight Union
  • Straight Union
Ask For Price
Straight Union -- DIN 2353 Fitting / Single Ferrule Fitting / Bite Type Fitting / 24Deg cone fittingStraight Union is manufactured as per DIN 2353 Standard / ISO 8434 -1 standardUnion is used to connect 2 tube in a straight lineUnion can be used with ferrule or weld nipple
Request
Callback
Yes! I am Interested

Reducing Union

Reducing Union
  • Reducing Union
Ask For Price
Reducing Union -- DIN 2353 Fitting / Single Ferrule Fitting / Bite Type Fitting / 24Deg cone fittingReducer Union is manufactured as per DIN 2353 Standard / ISO 8434 -1 standardReducer Union is used to connect 2 tube of different sizeReducer Union can be used with Ferrule or weldnipple
Request
Callback
Yes! I am Interested

Equal Elbow Union

Equal Elbow Union
  • Equal Elbow Union
Ask For Price
Equal Elbow Union -- DIN 2353 Fitting / Single Ferrule Fitting / Bite Type Fitting / 24Deg cone fittingEqual Elbow Union is manufactured as per DIN 2353 Standard / ISO 8434 -1 standardElbow Union is used to connect 2 tube in a 90Deg angleElbow Union can be used with ferrule or weld nipple
Request
Callback
Yes! I am Interested

Equal Tee Union

Equal Tee Union
  • Equal Tee Union
Ask For Price
Equal Tee Union -- DIN 2353 Fitting / Single Ferrule Fitting / Bite Type Fitting / 24Deg cone fitting Equal Tee Union is manufactured as per DIN 2353 Standard / ISO 8434 -1 standard Tee Union is used to connect 3 tube in a T direction Tee Union can be used with ferrule or weld nipple Reducing can be at centre of side
Request
Callback
Yes! I am Interested

Reducing Tee Union

Reducing Tee Union
  • Reducing Tee Union
Ask For Price
Reducing Tee Union -- DIN 2353 Fitting / Single Ferrule Fitting / Bite Type Fitting / 24Deg cone fittingReducer Tee Union is manufactured as per DIN 2353 Standard / ISO 8434 -1 standardReducer Tee is used to connect tubes of different sizeReducer Teen can be used with Ferrule or weldnipple
Request
Callback
Yes! I am Interested

Equal Cross Union

Equal Cross Union
  • Equal Cross Union
Ask For Price
Equal Cross Union -- DIN 2353 Fitting / Single Ferrule Fitting / Bite Type Fitting / 24Deg cone fittingEqual Cross Union is manufactured as per DIN 2353 Standard / ISO 8434 -1 standardCross Union is used to connect 4 tubeCross Union can be used with ferrule or weld nipple
Request
Callback
Yes! I am Interested

Bulkhead Union

Bulkhead Union
  • Bulkhead Union
Ask For Price
Bulkhead Union -- DIN 2353 Fitting / Single Ferrule Fitting / Bite Type Fitting / 24Deg cone fittingBulkhead Union is manufactured as per DIN 2353 Standard / ISO 8434 -1 standardBulkhead Union is used where panel or deck mounitng is required.Bulkhead Union can be used with ferrule or weld nipple
Request
Callback
Yes! I am Interested

Weldable Union

Weldable Union
  • Weldable Union
Ask For Price
Weldable Union -- DIN 2353 Fitting / Single Ferrule Fitting / Bite Type Fitting / 24Deg cone fittingWeldable Union is manufactured as per DIN 2353 Standard / ISO 8434 -1 standardWeldable Union is used where panel or deck mounitng is required.Weldable Union can be used with ferrule or weld nipple
Request
Callback
Yes! I am Interested

Bulkhead Elbow Union

Bulkhead Elbow Union
  • Bulkhead Elbow Union
Ask For Price
Bulkhead Elbow Union -- DIN 2353 Fitting / Single Ferrule Fitting / Bite Type Fitting / 24Deg cone fittingBulkhead Elbow is manufactured as per DIN 2353 Standard / ISO 8434 -1 standardBulkhead Elbow is used where panel or deck mounitng is required in 90DegreeBulkhead Elbow can be used with ferrule or weld nipple
Request
Callback
Yes! I am Interested

Male Connector

Male Connector
  • Male Connector
Ask For Price
Male Connector-- DIN 2353 Fitting / Single Ferrule Fitting / Bite Type Fitting / 24Deg cone fitting
  • Male connector is manufactured as per DIN 2353 Standard / ISO 8434 -1 standard
  • One end is connected to the tube and other end is connected to port
  • Male Connector can be used with ferrule or weld nipple
  • Port end can be NPT, BSPP, BSPT, UNF
Request
Callback
Yes! I am Interested

Male Elbow

Male Elbow
  • Male Elbow
Ask For Price
Male Elbow-- DIN 2353 Fitting / Single Ferrule Fitting / Bite Type Fitting / 24Deg cone fitting
  • Male Elbow is manufactured as per DIN 2353 Standard / ISO 8434 -1 standard
  • One end is connected to the tube and other end is connected to port
  • Male Elbow can be used with ferrule or weld nipple
  • Port end can be NPT, BSPP, BSPT, UNF

Request
Callback
Yes! I am Interested

Male Branch Tee

Male Branch Tee
  • Male Branch Tee
Ask For Price
Male Branch Tee -- DIN 2353 Fitting / Single Ferrule Fitting / Bite Type Fitting / 24Deg cone fitting
  • Male Branch Tee is manufactured as per DIN 2353 Standard / ISO 8434 -1 standard
  • In Male Branch Tee, centre is port end and run sides are tube  end 
  • Male Branch Tee can be used with ferrule or weld nipple
  • Port end can be NPT, BSPP, BSPT, UNF

Request
Callback
Yes! I am Interested

Male Run Tee

Male Run Tee
  • Male Run Tee
Ask For Price
Male Run Tee -- DIN 2353 Fitting / Single Ferrule Fitting / Bite Type Fitting / 24Deg cone fitting
  • Male Run Tee is manufactured as per DIN 2353 Standard / ISO 8434 -1 standard
  • In Male Run Tee, run side  is port end and centre & run side is tube  end 
  • Male Run Tee can be used with ferrule or weld nipple
  • Port end can be NPT, BSPP, BSPT, UNF

Request
Callback
Yes! I am Interested

Swivel Connector

Swivel Connector
  • Swivel Connector
Ask For Price
Swivel Connector -- DIN 2353 Fitting / Single Ferrule Fitting / Bite Type Fitting / 24Deg cone fitting
  • Swivel Connector is manufactured as per DIN 2353 Standard / ISO 8434 -1 standard
  • Two type of Swivel can be provide, one is ferrule swivel and other is Oring Swivel
Request
Callback
Yes! I am Interested

Swivel Elbow

Swivel Elbow
  • Swivel Elbow
Ask For Price
Swivel Elbow -- DIN 2353 Fitting / Single Ferrule Fitting / Bite Type Fitting / 24Deg cone fitting
  • Swivel Elbow is manufactured as per DIN 2353 Standard / ISO 8434 -1 standard
  • Two type of Swivel can be provide, one is ferrule swivel and other is Oring Swivel
  • Swivel Elbow is used to get proper position during Hydraulic Piping
  • Swivel Elbow can be used with ferrule or weld nipple

Request
Callback
Yes! I am Interested

Swivel Branch Tee

Swivel Branch Tee
  • Swivel Branch Tee
Ask For Price
Swivel Branch Tee -- DIN 2353 Fitting / Single Ferrule Fitting / Bite Type Fitting / 24Deg cone fitting
  • Swivel Branch Tee is manufactured as per DIN 2353 Standard / ISO 8434 -1 standard
  • Two type of Swivel can be provide, one is ferrule swivel and other is Oring Swivel
  • Swivel Branch Tee can be used with ferrule or weld nipple

Request
Callback
Yes! I am Interested

Swivel Run Tee

Swivel Run Tee
  • Swivel Run Tee
Ask For Price
Swivel Run Tee -- DIN 2353 Fitting / Single Ferrule Fitting / Bite Type Fitting / 24Deg cone fitting
  • Swivel Run Tee is manufactured as per DIN 2353 Standard / ISO 8434 -1 standard
  • Two type of Swivel can be provide, one is ferrule swivel and other is Oring Swivel
  • Swivel Run Tee can be used with ferrule or weld nipple
Request
Callback
Yes! I am Interested

Banjo Elbow

Banjo Elbow
  • Banjo Elbow
Ask For Price
Benjo Elbow -- DIN 2353 Fitting / Single Ferrule Fitting / Bite Type Fitting / 24Deg cone fitting
  • Benjo Elbow is manufactured as per DIN 2353 Standard / ISO 8434 -1 standard
  • Swivel Elbow is used to get proper position during Hydraulic Piping
  • Swivel Elbow can be used with ferrule or weld nipple
Request
Callback
Yes! I am Interested

Female Connector

Female Connector
  • Female Connector
Ask For Price
Female Connector -- DIN 2353 Fitting / Single Ferrule Fitting / Bite Type Fitting / 24Deg cone fitting
  • Female Connector is manufactured as per DIN 2353 Standard / ISO 8434 -1 standard
  • One end is connected to the tube and other end is connected to port
  • Female Connector can be used with ferrule or weld nipple
  • Port end can be NPT, BSPP, BSPT, UNF
Request
Callback
Yes! I am Interested

Tube End Reducer

Tube End Reducer
  • Tube End Reducer
Ask For Price
Tube End Reducer -- DIN 2353 Fitting / Single Ferrule Fitting / Bite Type Fitting / 24Deg cone fitting
  • Tube End Reducer is manufactured as per DIN 2353 Standard / ISO 8434 -1 standard
  • It is used to connect 2 tubes of different size
  • In Tube end reducer one nut is preinstalled on it
  • Tube end reducer can be of ferrule type of Oring type

Request
Callback
Yes! I am Interested

Weld Connector

Weld Connector
  • Weld Connector
Ask For Price
Weld Connector -- DIN 2353 Fitting / Single Ferrule Fitting / Bite Type Fitting / 24Deg cone fitting
  • Weld Connector  is manufactured as per DIN 2353 Standard / ISO 8434 -1 standard
  • It is used to take  out a line from exsisting pipe line
  • Weld Connector can be of ferrule type of Oring type

Request
Callback
Yes! I am Interested

Pressure Guage Connector

Pressure Guage Connector
  • Pressure Guage Connector
Ask For Price
Pressure Guage Connector -- DIN 2353 Fitting / Single Ferrule Fitting / Bite Type Fitting / 24Deg cone fitting
  • Pressure Guage Connector  is manufactured as per DIN 2353 Standard / ISO 8434 -1 standard
  • It is connected between the line & pressure guage
  • Pressure Guage Connector can be of ferrule type of Oring type
Request
Callback
Yes! I am Interested

Weld Nipple

Weld Nipple
  • Weld Nipple
Ask For Price
Weld Nipple -- DIN 2353 Fitting / Single Ferrule Fitting / Bite Type Fitting / 24Deg cone fitting
  • Weld Nipple  is manufactured as per DIN 2353 Standard / ISO 8434 -4 standard
  • It is used instead of Ferrule in tube fittings for High pressure rating

Request
Callback
Yes! I am Interested
X
Looking for “Single Ferrule”?


Reach Us
Mahesh Padia (Manager)
No. 46, 1st Floor, Jagat Sadguru Industrial Estate,kotkar Off Aarey Road, Goregaon East
Mumbai- 400063, Maharashtra, India


Call Us

Send E-mail

Send SMS