Jj Hydraulics Private Limited
Jj Hydraulics Private Limited
ISO 9001:2008 Certified
Goregaon East, Mumbai, Maharashtra
SEND SMS
SEND EMAIL

Double Ferrule

J. J. Twin Ferrule Fittings / Double Ferrule Fittings consists of Body, Nut, Front Ferrule and Back Ferrule. Twin Ferrule Fittings are available for different pressure rating ranging from 140Bar to 690Bar.

  • Type Twin Ferrule (Front & Back Ferrule)
  • Size 2mm to 25mm, 1/16”OD to 1 1/2”OD
  • Pressure from 130Bar to 760Bar depending on type and size
  • Material Steel, Stainless Steel, Brass (From extruded bar or forging)

Back Ferrule & Front Ferrule

Back Ferrule & Front Ferrule
  • Back Ferrule & Front Ferrule
Ask For Price
Back Ferrule & Front Ferrule -- Twin Ferrule Fittings / Double Ferrule Fittings / Instrumentation Fittings
  • The two ferrules are driven forward between the nut  and fitting body using the mechanical force created by rotating the nut clockwise. The back ferrule  is driven against the tapered rear of the front ferrule and the front ferrule is driven by force into the tapered mouth of the body. The rear ferrule is swaged radialy inwards on the tube while lifting the front ferrule out to form a full-faced seal on the tapered surface of the body

Request
Callback
Yes! I am Interested

Nut

Nut
  • Nut
Ask For Price
Nut -- Twin Ferrule Fittings / Double Ferrule Fittings / Instrumentation Fittings During assembly the nut is progressively tightened causing the ferrule to slide along the Degree Cone seat of the body and grip the tube
Request
Callback
Yes! I am Interested

Straight Union

Straight Union
  • Straight Union
Ask For Price
Straight Union -- Twin Ferrule Fittings / Double Ferrule Fittings / Instrumentation FittingsStraight Union is manufactured as per Double Ferrule Standard and equivalent to SwagelokIt is used to connect 2 tubes in straight line
Request
Callback
Yes! I am Interested

Straight Union Reducer

Straight Union Reducer
  • Straight Union Reducer
Ask For Price
Straight Union Reducer -- Twin Ferrule Fittings / Double Ferrule Fittings / Instrumentation FittingsStraight Union Reducer is manufactured as per Double Ferrule Standard and equivalent to Swagelok FittingsIt is used to connect 2 tubes of different size in straight line
Request
Callback
Yes! I am Interested

Equal Elbow Union

Equal Elbow Union
  • Equal Elbow Union
Ask For Price
Equal Elbow Union -- Twin Ferrule Fittings / Double Ferrule Fittings / Instrumentation FittingsEqual Elbow Union is manufactured as per Double Ferrule Standard and is equivalent to Swagelok FittingsIt is used to connect 2 tubes in 90Deg angle
Request
Callback
Yes! I am Interested

Equal Tee Union

Equal Tee Union
  • Equal Tee Union
Ask For Price
Equal Tee Union -- Twin Ferrule Fittings / Double Ferrule Fittings / Instrumentation Fittings

 Equal Tee Union is manufactured as per Double Ferrule Standard and is equivalent to Swagelok Fittings It is used to connect 3 tubes in T direction
Request
Callback
Yes! I am Interested

Reducer Tee Union

Reducer Tee Union
  • Reducer Tee Union
Ask For Price
Reducer Tee Union -- Twin Ferrule Fittings / Double Ferrule Fittings / Instrumentation Fittings

 
  • Reducer Tee Union is manufactured as per Double Ferrule Standard and is equivalent to Swagelok Fittings
  • It is used to connect tube of different size
  • Reudcing can be at centre of side

Request
Callback
Yes! I am Interested

Union Cross

Union Cross
  • Union Cross
Ask For Price
Union Cross -- Twin Ferrule Fittings / Double Ferrule Fittings / Instrumentation Fittings

 Union Cross is manufactured as per Double Ferrule Standard and is equivalent to Swagelok FittingsCross Union is used to connect 4 tube
Request
Callback
Yes! I am Interested

Bulkhead Union

Bulkhead Union
  • Bulkhead Union
Ask For Price
Bulkhead Union -- Twin Ferrule Fittings / Double Ferrule Fittings / Instrumentation Fittings

 Bulkhead Union is manufactured as per Double Ferrule Standard and is equivalent to Swagelok FittingsUnion Bulkhead is used where panel or deck mounitng is required.
Request
Callback
Yes! I am Interested

Male Connector

Male Connector
  • Male Connector
Ask For Price
Male Connector -- Twin Ferrule Fittings / Double Ferrule Fittings / Instrumentation Fittings

 Male Connector is manufactured as per Double Ferrule Standard and is equivalent to Swagelok Fittings One end is connected to the tube and other end is connected to the port.Port end can be NPT, BSPP, BSPT, UNF
Request
Callback
Yes! I am Interested

Male Elbow

Male Elbow
  • Male Elbow
Ask For Price
Male Elbow -- Twin Ferrule Fittings / Double Ferrule Fittings / Instrumentation Fittings

 Male Elbow is manufactured as per Double Ferrule Standard and is equivalent to Swagelok FittingsOne end is connected to the tube and other end is connected to the port.Port end can be NPT, BSPP, BSPT, UNF
Request
Callback
Yes! I am Interested

Male Branch Tee

Male Branch Tee
  • Male Branch Tee
Ask For Price
Male Branch Tee -- Twin Ferrule Fittings / Double Ferrule Fittings / Instrumentation Fittings

 Male Branch Tee is manufactured as per Double Ferrule Standard and is equivalent to Swagelok FittingsIn Male Branch Tee, centre is port end and run side are tube endPort end can be NPT, BSPP, BSPT, UNF
Request
Callback
Yes! I am Interested

Male Branch Tee

Male Branch Tee
  • Male Branch Tee
Ask For Price
Male Branch Tee -- Twin Ferrule Fittings / Double Ferrule Fittings / Instrumentation Fittings

 Male Run Tee is manufactured as per Double Ferrule Standard and is equivalent to Swagelok FittingsIn Male Run Tee, run side  is port end and centre & run side is tube  end Port end can be NPT, BSPP, BSPT, UNF
Request
Callback
Yes! I am Interested

Bulkhead Connector

Bulkhead Connector
  • Bulkhead Connector
Ask For Price
Bulkhead Connector -- Twin Ferrule Fittings / Double Ferrule Fittings / Instrumentation Fittings

 
  • Bulkhead Connector is manufactured as per Double Ferrule Standard and is equivalent to Swagelok Fittings
  • One end is connected to the tube and other end is connected to the port.
  • Port end can be NPT, BSPP, BSPT, UNF
  • Bulkhead Connector is used where panel or deck mounitng is required.

Request
Callback
Yes! I am Interested

Female Connector

Female Connector
  • Female Connector
Ask For Price
Female Connector -- Twin Ferrule Fittings / Double Ferrule Fittings / Instrumentation Fittings

 
  • Female Connector is manufactured as per Double Ferrule Standard and is equivalent to Swagelok Fittings
  • One end is connected to the tube and other end is connected to the port.
  • Port end can be NPT, BSPP, BSPT, UNF
Request
Callback
Yes! I am Interested

Female Elbow Connector

Female Elbow Connector
  • Female Elbow Connector
Ask For Price
Female Elbow Connector -- Twin Ferrule Fittings / Double Ferrule Fittings / Instrumentation Fittings

 
  • Female Elbow Connector is manufactured as per Double Ferrule Standard and is equivalent to Swagelok Fittings
  • One end is connected to the tube and other end is connected to the port.
  • Port end can be NPT, BSPP, BSPT, UNF
Request
Callback
Yes! I am Interested

Female Branch Tee

Female Branch Tee
  • Female Branch Tee
Ask For Price
Female Branch Tee  -- Twin Ferrule Fittings / Double Ferrule Fittings / Instrumentation Fittings

 
  • Female Branch Tee is manufactured as per Double Ferrule Standard and is equivalent to Swagelok Fittings
  • In Female Branch Tee, centre is port end and run side are tube end
  • Port end can be NPT, BSPP, BSPT, UNF

Request
Callback
Yes! I am Interested

Female Run Tee

Female Run Tee
  • Female Run Tee
Ask For Price
Female Run Tee  -- Twin Ferrule Fittings / Double Ferrule Fittings / Instrumentation Fittings

 
  • Female Run Tee is manufactured as per Double Ferrule Standard and is equivalent to Swagelok Fittings
  • In Female Run Tee, run side  is port end and centre & run side is tube  end 
  • Port end can be NPT, BSPP, BSPT, UNF

Request
Callback
Yes! I am Interested

Female Bulkhead Connector

Female Bulkhead Connector
  • Female Bulkhead Connector
Ask For Price
Female Bulkhead Connector  -- Twin Ferrule Fittings / Double Ferrule Fittings / Instrumentation Fittings

 
  • Female Bulkhead Connector is manufactured as per Double Ferrule Standard and is equivalent to Swagelok Fittings
  • One end is connected to the tube and other end is connected to the port.
  • Port end can be NPT, BSPP, BSPT, UNF
Request
Callback
Yes! I am Interested

Tube Reducer

Tube Reducer
  • Tube Reducer
Ask For Price
Tube Reducer  -- Twin Ferrule Fittings / Double Ferrule Fittings / Instrumentation Fittings

 
  • Tube Reducer is manufactured as per Double Ferrule Standard and is equivalent to Swagelok Fittings
  • It is used to connect 2 tubes of different size
  • In Tube end reducer one nut is preinstalled on it

Request
Callback
Yes! I am Interested

Weld Connector

Weld Connector
  • Weld Connector
Ask For Price
Weld Connector  -- Twin Ferrule Fittings / Double Ferrule Fittings / Instrumentation Fittings

 
  • Weld Connector is manufactured as per Double Ferrule Standard and is equivalent to Swagelok Fittings
  • It is used to take  out a line from exsisting pipe line

Request
Callback
Yes! I am Interested

Weld Elbow Connector

Weld Elbow Connector
  • Weld Elbow Connector
Ask For Price
Weld Elbow Connector  -- Twin Ferrule Fittings / Double Ferrule Fittings / Instrumentation Fittings

 Weld Elbow Connector is manufactured as per Double Ferrule Standard and is equivalent to Swagelok Fittings It is used to take  out a line from existing pipe line
Request
Callback
Yes! I am Interested

Closure Cap

Closure Cap
  • Closure Cap
Ask For Price
Closure Cap  -- Twin Ferrule Fittings / Double Ferrule Fittings / Instrumentation Fittings

 
  • Closure Cap is manufactured as per Double Ferrule Standard and is equivalent to Swagelok Fittings
  • It is used to block the existing line
Request
Callback
Yes! I am Interested

Closure Plug

Closure Plug
  • Closure Plug
Ask For Price
Closure Plug  -- Twin Ferrule Fittings / Double Ferrule Fittings / Instrumentation Fittings

 
  • Closure Plug is manufactured as per Double Ferrule Standard and is equivalent to Swagelok Fittings
  • It is used to block the exsisting line

Request
Callback
Yes! I am Interested
X
Looking for “Double Ferrule”?


Reach Us
Mahesh Padia (Manager)
No. 46, 1st Floor, Jagat Sadguru Industrial Estate,kotkar Off Aarey Road, Goregaon East
Mumbai- 400063, Maharashtra, India


Call Us

Send E-mail

Send SMS